ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML570G3 compatible whit 3Com 3C996SX

DiverHomer
Occasional Visitor

ML570G3 compatible whit 3Com 3C996SX

ERROR:System Halt PCI Adapter not supported on Slot04.
Is this compatible card whit the Proliant Server ML570G3?
I prove that in any slot and generate the same error and the server is halt.
TKS
Abel.
4 REPLIES
Girma Kassa_2
Frequent Advisor

Re: ML570G3 compatible whit 3Com 3C996SX

Hi Diver,

This seems a compatibility issue, and check the below link for compatible option for this server.

http://h18000.www1.hp.com/products/quickspecs/12201_na/12201_na.HTML

Cheers

Girma
Prashant (I am Back)
Honored Contributor

Re: ML570G3 compatible whit 3Com 3C996SX

Hi,

very much correct do one thing check the. But check for
following details :
---------------------------------------------
Expansion Slots Slot
Number Bus Speed Bus Number* Device Number** Hot Plug PCI Voltage Notes
-------------------------------------------
on the above linka and check for the bus speed and PCI Voltage then check the card specs then try to install.

Hope it helps.

Prashant S.
Nothing is impossible
Oleg Koroz
Honored Contributor

Re: ML570G3 compatible whit 3Com 3C996SX

Officially from 3Com Knowledgebase

Solution ID: 3KB15055


3C996B - Error message "Unsupported PCI Card detected" when used with HP Proliant Servers

Problem: Error message "Unsupported PCI Card detected" when used with HP Proliant Servers

Problem: Error message "System Halted"

Fact: 3C996B-T

Fact: 3C996

Fact: 3C996-SX

Fact: 3C996B Gbe PCI-X Server NIC

Fact: HP Proliant Server

Fact: Compaq Proliant G4

Fix: There is currently no support for the 3C996B in Compaq and HP Proliant Servers. Upon using this card with the HP Server the error messages stated above are generated.
Oleg Koroz
Honored Contributor

Re: ML570G3 compatible whit 3Com 3C996SX

addition ML570G3 architecture similar to G4

#COm with 3C996 affected