ProLiant Servers (ML,DL,SL)

MTBF and MTTR for Proliant DL 380 and 120 G9

 
RAMS-Engineer
Visitor

MTBF and MTTR for Proliant DL 380 and 120 G9

I need the current data :

MTBF and MTTR for the DL 380 and DL 120 G9 to check the reliabilty of the whole installation of a new project.

I dont get it why nothing is mentioned in the data sheet reagarding these infomrations as other manufacturers do ??

3 REPLIES 3
Erdogan Temur
HPE Pro

Re: MTBF and MTTR for Proliant DL 380 and 120 G9

Hello,

Since the configuration of each device is different, the MTBF and MTTR values will also be different.
You can request MTBF and MTTR values for the device in your project.

Kind Regards,
Erdogan.
No support by private messages. Please ask the forum!

Accept or Kudo

I am HPE Employee
RAMS-Engineer
Visitor

Re: MTBF and MTTR for Proliant DL 380 and 120 G9

Hello,

It has nothing to do with the project. These are servers and usually they are used 24/7 in suitable conditions. Also MTBF and MTTR are values wich are features of the components and not relative to the project.

The used servers are : 

HPE Proliant DL380p Gen9 - Xeon E5-2460 2.4GHz-32Go :

  1. Rackable 2U
  2. Intel Xeon E5-2640
  3. 3 hard drives of 2TO hot swap , 2.5" format, SAS-2; RAID 5 +1 hot spare
  4. 32 GO RAM
  5. 4 Ethernet slots 10/100/1000 base TX

HPE Proliant DL120 p Gen9 Base -Xeon E5-2620 2.4 Ghz -16 Go:

  1. Rackable 1U
  2. Intel Xeon E5-2620v3
  3. 2 Hard drives 600 Go Hot swap, 2.5" format SAS-2, RAID 1
  4. 16 Go RAM
  5. 2 Ethernet Slots 10/100/1000 BASE TX
ksram
HPE Pro

Re: MTBF and MTTR for Proliant DL 380 and 120 G9

Hi @RAMS-Engineer ,

Thank you for the Post.

We understand your concern. To get the information about MTBF we would request you to contact the Sales Team or the Point of Purchase, and they shall assist you in getting the required details.

Thank you,

RamKS

 


I work for HPE

Accept or Kudo