ProLiant Servers (ML,DL,SL)
1754014 Members
7611 Online
108811 Solutions
New Discussion юеВ

Re: MacAddress, how to?

 
Andrea_rst
Occasional Advisor

MacAddress, how to?

I had to replace the motherboard of a server hp proliant ML330 G4 with a new one, but I have a big problem, I need to know the MAC address of the network interface of the old MB, how do I?

Old MB not work, can HP tell me mac address from serial  ?

Tnk u 

11 REPLIES 11
Torsten.
Acclaimed Contributor

Re: MacAddress, how to?

IMHO you should find a sticker on the board.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrea_rst
Occasional Advisor

Re: MacAddress, how to?

there isn't

Torsten.
Acclaimed Contributor

Re: MacAddress, how to?

If you can still access ILO you may find it there.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrea_rst
Occasional Advisor

Re: MacAddress, how to?

MB not work, when i try to power it, all error led flashing and not happens

Torsten.
Acclaimed Contributor

Re: MacAddress, how to?

But ILO may still work, did you try?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrea_rst
Occasional Advisor

Re: MacAddress, how to?

How i can try? 

Can y tell me procedure?

Tnku

Torsten.
Acclaimed Contributor

Re: MacAddress, how to?

>> I had to replace the motherboard of a server hp proliant ML330 G4 ...

 

I know the G1, G2, G3 and G6, but I'm not aware of a G4.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrea_rst
Occasional Advisor

Re: MacAddress, how to?

uhm i think it not have ilo, MB have only one nic.

Jimmy Vance
HPE Pro

Re: MacAddress, how to?

I'm with you Torsten, I don't think there was an ML330 G4. The closest I see is the ML350 G4. I think all the G3 and G4 systems used the RILOE II option card.

No support by private messages. Please ask the forum!