ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Maintenance switch DL160G Stuck

pappkopp
Occasional Contributor

Maintenance switch DL160G Stuck

One of my DL160 has a problem where during the POST, it gets stuck with the message:

 
Maintenance switch detected in the "On" position. Power off the server and turn switch to the "Off" position.

 

There is no button or jumper containing this.( as i can see)

Model HP SE316M1/DL160 G6

Kind Regards

4 REPLIES
scharchouf
Trusted Contributor

Re: Maintenance switch DL160G Stuck

ther's System maintenance jumper position

 

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01728029-10.pdf

 

 

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

pappkopp
Occasional Contributor

Re: Maintenance switch DL160G Stuck

I can't seem to understand why it's not working, my other servers has the same jumper position.

This is the system that is't working:

http://i.imgur.com/6y9L8LC.jpg

scharchouf
Trusted Contributor

Re: Maintenance switch DL160G Stuck

try as well to change the place of Jumper, to ensure that the motherboard functions properly.

Another trick is trying to update the BIOS

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

Martin_from_dk
Occasional Visitor