HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Maximum shared memory with integrated graphics chip on ML10 Gen9

 
E3die
Occasional Visitor

Maximum shared memory with integrated graphics chip on ML10 Gen9

Hello.

I have strange problem. I have set graphics shared memory to 1,5 GB value and server halted, reboot and stays powered on with red led ligt (CPU error). Fortunately, reset CMOS fixed this, but i must set value to 256MB, server is now running with this setting...I dont know, which value i can set there, because there is no such an information in User guide manual, Qucik specs, Product bulletin etc.. I have 24GB RAM in server.  Does anybody know, which maximum value is acceptable for this server ? 

Thank you