Media Bay drive tray part#

[Richard Cini_1]

I'm looking for a drive tray for the Media Bay on my PL1600R to fit a 3.5" hard drive. I was browsing PartSurfer but didn't come up with a viable part number.

Does anyone have a part number for this drive tray?

Thanks.

[Brian_Murdoch]

Richard,

You could experiment to see if the floppy disk drive tray is suitable as an alternative. If you remove the floppy disk you'll see the tray below it. You may have to buy a floppy disk unit to get the tray unfortunately, this is spare part number 172465-001.

There may also be options available for the later ML370G1 (Replacement for the 1600) as it has a similar chassis. I'll have a further look and post any findings here.

Regards,

Brian

[e4services]

I think we have the tray you are looking for. Write us directly so we can send you a picture and see if that is it. sales@e4servicesinc.com