Memory Congif for DL380 G6 for 20GB Ram

[Proliant DL380G6 Memory]

I am trying to configure 20GB of RAM on proliant DL380G6 server. it has 2 proccessos. i used the mem tool form HP, but the server keeps on beeping and saying wrong memory config.

Please assist as this is very critical.

[TTr]

Did you use the latest memory config tool?

What kind of DIMMs do you have and how many?

Have you tried installing fewer DIMMs and does the server accept them?

Is the problem really in the memory or is there something else causing the beeping. I know you mentioned "wrong memory config" but verify the beeping codes as well.

[TTr]

I don't see how you would end up with 20GB using the memory installation rules for this server.

Take a look at the memory section here.
http://h18004.www1.hp.com/products/quickspecs/13234_div/13234_div.html#Memory

[Proliant DL380G6 Memory]

Whcih is the new memory tool. can i have the link. the memory used part number is 500202-061 and they are of 2GB

[TTr]

Have you looked at the memory URL above, SECOND table and tried to install the memory in DIMM slots A,B,C,D,E? That is install in slot numbers 3,6,9,2,5 for both memory banks.

[Jon Ward]

Please ensure you are now mixing UDIMMs and RDIMMs.

[Jon Ward]

now=not

[juan quesada]

500202-061 = 501533-001 = PC3-10600 (DDR3-1333) 2-GB (RoHS) = RDIMM dual rank.

check DDR3 memory population guidelines

note: restore defaults to server to make sure you have not selected an AMP mode.

http://h18000.www1.hp.com/products/quickspecs/13234_div/13234_div.html#Memory

yo should have a,b,c,d,e populated on each processor side.