ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Memory Upgrade ML330 G6

 
CSMRollins
Occasional Visitor

Memory Upgrade ML330 G6

I recently purchased a HP ProLiant ML330 G6 with 4 GB Memory installed in slot 3A (white).  I purchased an additional HP 8GB 21Rx4 PC3L-10600R9 memory stick.  I want to install it correctly and figure it will go in the current slot where the 4GB is and the 4GB will move to slot 6B, which is the next available white slot.  This server only has one processor.

Thanks for any help rendered.

3 REPLIES
PGTRI
Honored Contributor

Re: Memory Upgrade ML330 G6

hi,

 

The config is ok, if that is your question.

 

regards,

How to Say Thank You? Just click the KUDOS!
Renjiv
Respected Contributor

Re: Memory Upgrade ML330 G6

Hi,

 

You may insert the 8GB DIMM in slot 3A and 4GB in slot 6B.

eg:

 

SLOT 1: ------------

SLOT 2: ------------

SLOT 3: SPS-DIMM 8GB PC3L-10600

SLOT 4: ------------

SLOT 5: ------------

SLOT 6: SPS-DIMM 4GB PC3L-10600

 

Also refer below link for memory configuration guidelines for ML330 G6.

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01769931&jumpid=reg_R1002_USEN

 

Regards,

Renji V

I am an HP employee.

Was this post useful? -
To say thanks click the "thumbs up" icon below!!! .....
Goutham_Sabala
Esteemed Contributor

Re: Memory Upgrade ML330 G6

Should work 

 

8Gb in Slot 3A

4Gb in Slot 6B

Was the post useful? Say thanks by clicking the white KUDOS Star!
Goutham Sabala