HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Memory on Smart Array 5i Controller

 
pav
Occasional Contributor

Memory on Smart Array 5i Controller

Hello Guys,
is there a tool or possibility to find out if the memory on my 5i Controller are enough?

Thanks a lot,
pav


3 REPLIES
Paul W_1
Occasional Advisor

Re: Memory on Smart Array 5i Controller

You can go into the Array Configuration utility, highlight the 5I and chose more info on the right hand side. This will tell you the battery size.
Oleg Koroz
Honored Contributor

Re: Memory on Smart Array 5i Controller

do you have any Timeouts, any read write errors from system LOG, any Data base Write Problem ??
How did you come up to with Q: memory on my 5i Controller are enough?
Jaime Bolanos Rojas.
Honored Contributor

Re: Memory on Smart Array 5i Controller

This might help you:

Channel Transfer Rate 320 MB/s total; 160 MB/s per channel

and

Memory 32 MB of DRAM used for code, transfer buffers, and non-battery backed read cache.
Work hard when the need comes out.