ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Memory status not shown

Allen Huang_1
Frequent Advisor

Memory status not shown

We installed some memory on DL160Z G6 Sled servers. I'm trying to access the memory status using the hp-health RPM installed on it. It seems to be recognizing the DIMMs. But the status shows “N/A”. Any ideas on how to make this status available? Thanks.

[root]# hpasmcli -s "show dimm"

Cartridge #: 0
Processor #: 1
Module #: 3
Present: Yes
Form Factor: fh
Memory Type: 5h
Size: 4096 MB
Speed: 800 MHz
Status: N/A

Cartridge #: 0
Processor #: 1
Module #: 2
Present: Yes
Form Factor: fh
Memory Type: 5h
Size: 4096 MB
Speed: 800 MHz
Status: N/A


3 REPLIES
Michael A. McKenney
Respected Contributor

Re: Memory status not shown

Is that OS compatible with the server. Did you load all the proper drivers for the server board?
Allen Huang_1
Frequent Advisor

Re: Memory status not shown

The server is a SL160 G6 running CentOS 5.
Is there another way to see the memory status from a management GUI installation? For example, can we install SMH on CentOS to check the memory status?
Michael A. McKenney
Respected Contributor