MicroServer Gen10

[Dkonsmo]

Hello,

Just looking to find out if there's any way to look at the current status of a RAID setup on a MicroServer Gen10 that is using the Marvell utility.  The OS is VMware ESXi 6.5 U3 and is running various Windows Server guest operating systems.  

We are aware of how to check by going into the Marvell utility on reboot however it would be nice to check it without rebooting the physical server.

[support_s]

Hewlett Packard Enterprise (HPE) recommends:

1. HPE Insight Remote Support 7.10 Release Notes

[Dkonsmo]

Anyway to use the Marvell storage utility to access the RAID through a virtual machine through the hypervisor?

[ksram]

Hi @Dkonsmo 

Thank you for the POST.

Here we can use the Utility only on Offline Environment for ESXI.

Sharing few links for reference to access the  Marvell Storage Controller Utlilty :

https://support.hpe.com/hpesc/public/docDisplay?docId=a00104933en_us

https://support.hpe.com/hpesc/public/docDisplay?docId=a00036946en_us&docLocale=en_US#N10206

Thank you

RamKS

[ksram]

Hi @Dkonsmo ,

Good day!

Just following on this to see if the shared links were helpful!

Thank you

RamKS