ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

MicroServer Gen10

 
Dkonsmo
Occasional Visitor

MicroServer Gen10

Hello,

Just looking to find out if there's any way to look at the current status of a RAID setup on a MicroServer Gen10 that is using the Marvell utility.  The OS is VMware ESXi 6.5 U3 and is running various Windows Server guest operating systems.  

We are aware of how to check by going into the Marvell utility on reboot however it would be nice to check it without rebooting the physical server.

4 REPLIES 4
support_s
System Recommended

Query: MicroServer Gen10

Hewlett Packard Enterprise (HPE) recommends:

1. HPE Insight Remote Support 7.10 Release Notes

 

Dkonsmo
Occasional Visitor

Re: Query: MicroServer Gen10

Anyway to use the Marvell storage utility to access the RAID through a virtual machine through the hypervisor?
ksram
HPE Pro

Re: Query: MicroServer Gen10

Hi @Dkonsmo 

Thank you for the POST.

Here we can use the Utility only on Offline Environment for ESXI.

Sharing few links for reference to access the  Marvell Storage Controller Utlilty :

https://support.hpe.com/hpesc/public/docDisplay?docId=a00104933en_us

https://support.hpe.com/hpesc/public/docDisplay?docId=a00036946en_us&docLocale=en_US#N10206

Thank you

RamKS

 

 


I work for HPE

Accept or Kudo

ksram
HPE Pro

Re: Query: MicroServer Gen10

Hi @Dkonsmo ,

Good day!

Just following on this to see if the shared links were helpful!

Thank you

RamKS

 


I work for HPE

Accept or Kudo