ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Microosft NT4.0 (TSE) on Proliant 570 G2

 
Gary Smith_5
Occasional Visitor

Microosft NT4.0 (TSE) on Proliant 570 G2

How do I use SnartStart to set-up my new ProLiant ML570 G2 with Terminal Server. it is not listed in Operating Systems on SmartStart version 6.00. Cannot use NT 4 Server or Windows 2000 - Will not accept my OS Cd when the smartstart process asks for it

Ta
1 REPLY
Claude Boileau
Valued Contributor

Re: Microosft NT4.0 (TSE) on Proliant 570 G2

Hi Gary,

If you have problem with the assisted path for the terminal server 2k you could bypass the smartstart provided you run the RSBU (rom base setup utility; f9) and the ACU (array configuration) f8 on most controllers. Then by booting of your terminal cd you would hit select f6 proposed by windows 2k and off the mass storage selection the OEM disk for the array controller. The controller disk is found on disk # 2 of the sp14437 found on the FTP for Compaq.com (hp) or in the search engine you can type in sp14437 and extract disk #2.
Hope this will help.
Claude