Query: Microserver Gen8 - does not see any drives anymore

[Carlos Alfaro]

I have a GEN8 microserver with 16 gigs of ram.  I loaded 2 6Tb hdd and 2 4Tb hdd.  They are not seen by the OS/Bios.  I did install to test initially 4 SSDs which were recognized right away.

I had the embedded raid controller active when i tired the 4 SSDs but it does not work with the HDDs.  I tried setting legacy mode and AHCI but it is still not working.  Any help will be appreciated.

Anything specific I ned to do?

I also reset everything to factory settings and that didnt do anything anyway

[support_s · Accepted solution]

System recommended content:

1. HPE ProLiant MicroServer Gen8 - Option Parts

2. HP ProLiant MicroServer Gen8 User Guide (.chm - to view save to hard drive)

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Carlos Alfaro]

Ok, SO I was able to figured out what was the problem.  Stupid mistake to connect to the wrong RAID controller.

Thanks

[Parvez_Admin]

@Carlos Alfaro ,

Great! Glad to know that you were able to resolve the issue.