HPE Community
ProLiant Servers (ML,DL,SL)
1751798 Members
5714 Online
108781 Solutions
New Discussion

Re: Migrating from NT

 
Ayman Altounji
Valued Contributor

‎06-26-2002 04:00 PM

‎06-26-2002 04:00 PM

Migrating from NT

Dual P200, 1GB RAM, 4 no. 9.1GB scsi HDD, SMART 2D/H array controller.
Using SmartStart to clean system and install Windows2000 Server. Everything goes fine until the final boot into Windows, when the Installing Compaq Integration & Utilities window appears after logon. The system reboots after this, then every boot from then on results in a BSOD STOP error referencing unable to find boot device.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎07-03-2002 04:00 PM

‎07-03-2002 04:00 PM

Re: Migrating from NT

Hi, make sure the bios and the smart array as been updated and if it still give you the boot device error, try going in the f10 partition to check the scsi boot order : it needs to be scsi 1st in the boot order for the smart array. Hope this will help
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.