HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Migrating single drive to mirror

 
zz0
Advisor

Migrating single drive to mirror

I have HP Proliant DL140 G3 server with P600 controller and MSA50 storage attached.
Bays 1 and 2 was a RAID-1 mirror for system boot and were replaced by a single drive in bay 2.

Can I convert that single drive to mirror anyway?
I inserted the same drive to bay1, but ACU shows it as "??? SAS Drive at port 2I: Box 1:Bay 1" in "SAS Array A" section.
And new inserted drive is marked as "146GB SAS Unassigned drive at Port 1E:Box 1:Bay 1" out of any arrays.

Can I convert that 2 drives to the single RAID-1 SAS Array A?
There are no any ACU wizards could to be applied to that array.