HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Mirror disks in Proliant Servers

 
SOLVED
Go to solution
Laritza
Occasional Contributor

Mirror disks in Proliant Servers

how can I identify when I have a mirror disk in Smart Storage Administrator? .For example in this image I can see two disks but I do not know that if the second disk is doing the mirroring  disk function,somebody could you explain to me in this example?,thanks in advance

3 REPLIES
Laritza
Occasional Contributor

Re: Mirror disks in Proliant Servers

how can I identify when I have a mirror disk in Smart Storage Administrator? .For example in this image I can see two disks but I do not know that if the second disk is doing the mirroring disk function,somebody could you explain to me in this example?,thanks in advance
Jimmy Vance
HPE Pro
Solution

Re: Mirror disks in Proliant Servers

Two single disk arrays (RAID 0) no mirroring.  Array A has three logical drives and Array B has one logical drive.  For a mirror, both physical drives would need to be part of the same array, and the array would have to be setup as RAID 1 or RAID 1+0




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Laritza
Occasional Contributor

Re: Mirror disks in Proliant Servers

thanks very much for your help