HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Ml 350 G4 Stall

 
Jorge Baptista
Occasional Visitor

Ml 350 G4 Stall

Hello. I have RAID 10, with 6 Drives.

I installed the windows 2003 server fine, but after i install the Service Pack 2, the windows can't boot, it stalls on the Windows 2003 server logo.
I can't boot on safe mode, or any other mode.

What could be the cause of this?

Thanks.
Best Regards.
2 REPLIES
asqwq
Regular Advisor

Re: Ml 350 G4 Stall

hi
i think cause of this is your software .
not your hardware
please install win 2003 with smart start
and update your server with maintenance cd and after that say to me what hapend?
best regards
Jorge Baptista
Occasional Visitor

Re: Ml 350 G4 Stall

I can't install using the smart start, im not using the HP RAID controller, im using adapted controller, and the smart start doesn't detect. So i must use the convencional way.
But i already had installed in the past using the win2003 server cd, but i was using the RAID 5, and i never had this kind of problem.

Could it be a disk flaw? But the RAID claims to be Optimal, no errors found.