ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Ml110 ont booting to raid drive after os setup

 
James Alsobrook
Occasional Contributor

Ml110 ont booting to raid drive after os setup

I'm been tring to get a ml110 to boot to the raid drive set after the the server preinstall

all it does is restart the Os install
3 REPLIES
Michael A. McKenney
Respected Contributor

Re: Ml110 ont booting to raid drive after os setup

Did you set the RAID controller to boot from that partition. In the CMOS, did you set the RAID controller in the boot order after CD/DVD drive. Remove the CD/DVD from the drive and reboot.
James Alsobrook
Occasional Contributor

Re: Ml110 ont booting to raid drive after os setup

Yes to all
It has an hp smart array p212 installed went thru the smart start setup the raid and logical drives everything seems correct
But strange thing is that in the BIOS it does not offer booting to the raid controller only lists hard drive
Michael A. McKenney
Respected Contributor

Re: Ml110 ont booting to raid drive after os setup

You should see the controller or RAID array in the boot order area. Did you run the firmware on the controller and drives? If not, do it. Are you sure that controller is compatible with the server, enclosures, and drives?