cancel
Showing results for 
Search instead for 
Did you mean: 

Ml150 g5

 
Cristofer
Occasional Visitor

Ml150 g5

hi i have recently purchased a server ml150 g5 with 2x250gb sata the thing is tha inside the bios i change the disk configuration to raid but in the option press F8 to configure arrays i get a message no logical drives found. here is the picture. what is the problem?
3 REPLIES
Gary Benavides Meza
Trusted Contributor

Re: Ml150 g5

You need to press F8, get into the array configuration utility and create a logical drive a RAID. It says "No logical Drives found" becuase there is no logical drives configured just physical hdd.
- You press F8 for Embedded SATA setup when prompted
- On the HP Embedded SATA setup select array configuration utility and press enter.
- On the main menu select Create array
- Then select the hard drives to create the raid.
- Chosse the RAID level 1 or 0. and create the array via as quick init.
Cristofer
Occasional Visitor

Re: Ml150 g5

the thing is that when i press the F8 and make create array message is "no drives detected". Is it something else i am not doing right?
Pilikas Petros
Occasional Visitor

Re: Ml150 g5

I have the same issue. The problems occured when inged the "Configure Controller 1 as --> RAID.