Monitor port status for DL360 Gen9 and Gen10 servers

[engshadi]

Hi all,

I am running snmpwalk to monitor the ports on DL360 Gen9 and Gen10 servers

Can I have idea about port status, what 1, 2 and 4 means.

[root@zabbix01 ~]# snmpwalk 172.30.57.4 -v 2c -c halcyon .1.3.6.1.4.1.232.18.2.3.1.1.13
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.2 = INTEGER: 2
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.3 = INTEGER: 2
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.4 = INTEGER: 2
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.5 = INTEGER: 2
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.6 = INTEGER: 2
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.7 = INTEGER: 2
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.8 = INTEGER: 4
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.9 = INTEGER: 1
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.10 = INTEGER: 1
SNMPv2-SMI::enterprises.232.18.2.3.1.1.13.11 = INTEGER: 1

[hshrib]

This is the cpqNicIfPhysAdapterState (NicPhysical Adapter State)

unknown (1),
active (2),
standby (3),
failed (4)

[engshadi]

Thanks bro for your reply.

What is the meaning of Unknown (1) status, in which scenario we got this status?