ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Monitoring Ethernet adapters on Proliant DL380 G9 through SNMP

 
Stephoni
Occasional Visitor

Monitoring Ethernet adapters on Proliant DL380 G9 through SNMP

Dear Community,

My task is to monitor the status of the Ethernet adapters on board of a Proliant DL380 G9 by means of SNMP. I'm not an expert. Could anyone tell what should I do (which OID to use, what should be enabled on the srver)? Consider the server is running Windows 2016 Standard Edition.

Thanks in advance for any reply.

Stefano

1 REPLY 1
ronissac
HPE Pro

Re: Monitoring Ethernet adapters on Proliant DL380 G9 through SNMP

Hi  ,

SNMP can be set up from your ILO 4 . Please follow the below link for reference 

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045551en_us&docLocale=en_US

 

Regards

Ronny


If you feel this was helpful please click the KUDOS! Thumbs below!


Accept or Kudo