Monitoring SSD drive endurance

[M.S]

Hi All,

We are adding an SSD drive to DL 360 G7 server.  We want to monitor the SSD endurance by sending snmp traps.

what is the best tool for that.

Thanks,

[d3vnul]

Hello,

Please read : http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.HTML

HP Solid State Drives are equipped with tools that can report the amount of lifetime remaining. Introducing HP SMARTSSD Wear Gauge™. In order to take advantage of SMARTSSD Wear Gauge™, Smart Array Firmware version 5.0 or greater is required and HP Array Configuration Utility (ACU) or HP Diagnostic Utility (ADU) must be running.

SNMP Storage Agents for both Microsoft® Windows® and Linux provide status and condition updates through traps, OS event logs and the HP System Management Homepage
http://h18013.www1.hp.com/products/servers/management/agents/index.html

The HP SMARTSSD Wear Gauge™ requires a controller listed below (for pre-Gen8 servers) or a Gen8 Smart Array controller for HP ProLiant Gen8 servers.

HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P712m Controller
HP Smart Array P812 Controller

 
Not sure if this is what you are looking for , but i do hope it provides some help. Best regards.