ProLiant Servers (ML,DL,SL)
1748156 Members
3777 Online
108758 Solutions
New Discussion

Monitoring the Temprature

 
Ayman Altounji
Valued Contributor

Monitoring the Temprature

Is there any way to get the temprature of a DL380 at the Unix operating system level? I would like to monitor the temprature and send an email warning to a pager if it gets beyond safe limits.

Thanks for the help.

Gary Hill
1 REPLY 1
Ayman Altounji
Valued Contributor

Re: Monitoring the Temprature

The specs is the only information that is provided at this time operational and non-operational. See Below:

ProLiant DL380 System Specifications
System Unit U.S. Metric
Dimensions (HxWxD) 5.1 x 19 x 24.6 in 13.1 x 48.3 x 62.5 cm
Weight
No hard drives installed, one power supply 55 lbs 25 kg
Heat Dissipation 1475 BTU/h
Input Requirements (per power supply) Low Range High Range
Range Line Voltage 90 to 132 VAC 180 to 265 VAC
Nominal Input Voltage 100 to 120 VAC 200 to 240 VAC
Rated Input Current 4.8A (110V) to 2.4A (220V)
Rated Input Frequency 50 to 60 Hz 50 to 60 Hz
Rated Input Power 432W
SCSI Connectors Three HD68 connectors (2 internal, 1 external) supporting Ulra2
Power Supply Output Power (per power supply)
Rated Steady-State Power 275W
Maximum Peak Power 305W
Temperature Range
Operating 50? to 95? F 10? to 35? C
Non-operating -20? to 140? F -30? to 60?C
Shipping -22? to 122? F -30? to 60?C
Relative Humidity (noncondensing)
Operating 8% to 90%
Nonoperating 5% to 95%
Maximum Wet Bulb Temperature 101.7? F 38.7? C
Acoustic Noise NPEL (BELS) Average SPL (dBA)
Idle (Fixed Disk Drives Spinning 6 43
Operating (Random Seeks to Fixed Disks) 6.1 44