ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Moving RAID Array

Ayman Altounji
Valued Contributor

Moving RAID Array

I moved a RAID array controller and the hard drives from one 1850R, which has a bad motherboard, to a new 1850R, which had not yet been setup. Booted up the server and all was fine, but users are complaining of extreme slowness. Any ideas?
1 REPLY
Mark Cloutier
Respected Contributor

Re: Moving RAID Array

how about memory config? is it the same..?
are you using the same cabling as the old system? if not and if you have ultra 3 drives make sure you are using an ultra 3 cable...is the array controller the same one or identical one? if identical is the rom on it the same?
how about the nics? are they the same..did you go from a 10/100 to a 10?
We are here for a good time, not a long time!