HPE Community
ProLiant Servers (ML,DL,SL)
1752273 Members
4725 Online
108786 Solutions
New Discussion

Moving an array from a DL360G9 to another DL360 G9

 
ddicky
Contributor

‎10-25-2018 07:49 PM - edited ‎10-25-2018 07:49 PM

‎10-25-2018 07:49 PM - edited ‎10-25-2018 07:49 PM

Moving an array from a DL360G9 to another DL360 G9

I plan to save some setup time on my O.S , applications and database. I have an array of RAID 1 which I plan to unplug it from DL360G9and let call  it A server.  I plan to re-plug in these 2  HDD RAID 1 into  another  DL360G9 call it  B server on the same RAID 1 configuration and HDD slot on the B server. Will it work fine for the B server?

0 Kudos
Reply
1 REPLY 1
Jimmy Vance
HPE Pro

‎10-25-2018 08:08 PM

‎10-25-2018 08:08 PM

Re: Moving an array from a DL360G9 to another DL360 G9

@ddicky wrote:

I plan to save some setup time on my O.S , applications and database. I have an array of RAID 1 which I plan to unplug it from DL360G9and let call  it A server.  I plan to re-plug in these 2  HDD RAID 1 into  another  DL360G9 call it  B server on the same RAID 1 configuration and HDD slot on the B server. Will it work fine for the B server?

Yes, as long as the firmware on the Smrt Array controller is the same or newer than the firmware version on the original server.  

Standard discalimer: Anytime you are changing hard drive configuations, make sure you have a valid backup of the data

No support by private messages. Please ask the forum! 
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.