ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Moving data on SAS HDD

 
NKgilles
Occasional Advisor

Moving data on SAS HDD

Hello all

I have two 146 GB HDD SAS of my prolific hp failing. how could I transfer data from these disks to another disk?

Thank you

6 REPLIES

Re: Moving data on SAS HDD

Hello NKgilles, 

normally the supported backup solution depends on the server model. If the disks are still functional and in RAID 1, you can try replacing them one after the other, when the reguild finishes. 

If the HDDs are already marked as failed and you cannot re-enable them in the smart storage administrator, then there is no way from HPE to access the data. 

 

I am an HPE Employee.
If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
NKgilles
Occasional Advisor

Re: Moving data on SAS HDD

Hello AleksandraIsa

so it is not possible to recover it on a machibe via a SAS adapter? unfortunately I do not have a spare disk and my services are no longer working. Raid 1 contained 3 disks. two are down and the virtual machines that have their data on it do not work anymore

Re: Moving data on SAS HDD

Hİ @NKgilles

logical volume may be disabled.

Do you get press message for F1 or F2 key on the post screen?
Press F2 will open the system.

If the above step is not appropriate.

Open the server with the bootable linux cd and backup the data in it.
re-create the raid and install the operating system then restore your backups.

Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
smokin901
HPE Pro

Re: Moving data on SAS HDD

Hi,

What is your RAID configuration

RAID 1 (mirroring) requires min and max of 2 hard drives. 3 Hard drives will be required if you are configuring RAID 1 + online spare.

I am an HPE Employee
The comments in this post are my own and do not represent an official reply from the company

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution
Highlighted
NKgilles
Occasional Advisor

Re: Moving data on SAS HDD

Hello smokin901

3 hard drive for the RAID 1, 2 hard drive issues. I would like to retrieve this data on a laptop

Re: Moving data on SAS HDD

If you are using a Smart Storage Controller, here is a link to the  technical documentation

www.hpe.com/info/smartstorage-docs

I am an HPE Employee
Don't forget to give Kudos if the problem got resolved or like suggestion

JillTech