normally the supported backup solution depends on the server model. If the disks are still functional and in RAID 1, you can try replacing them one after the other, when the reguild finishes.
If the HDDs are already marked as failed and you cannot re-enable them in the smart storage administrator, then there is no way from HPE to access the data.
I am an HPE Employee. If this helps you with your issue, please click the thumb to register a Kudo. If it resolves the issue, please consider marking it as an Accepted Solution.
so it is not possible to recover it on a machibe via a SAS adapter?unfortunately I do not have a spare disk and my services are no longer working.Raid 1 contained 3 disks.two are down and the virtual machines that have their data on it do not work anymore
Do you get press message for F1 or F2 key on the post screen? Press F2 will open the system.
If the above step is not appropriate.
Open the server with the bootable linux cd and backup the data in it. re-create the raid and install the operating system then restore your backups.
Kind Regards, Erdogan. I am HPE Employee
If this helps you with your issue, please click the thumb to register a Kudo. If it resolves the issue, please consider marking it as an Accepted Solution. The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
RAID 1 (mirroring) requires min and max of 2 hard drives. 3 Hard drives will be required if you are configuring RAID 1 + online spare.
I am an HPE Employee The comments in this post are my own and do not represent an official reply from the company
If this helps you with your issue, please click the thumb to register a Kudo. If it resolves the issue, please consider marking it as an Accepted Solution
