HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple FANs failed at once?

 
OERNii2
Occasional Visitor

Multiple FANs failed at once?

Hi, my server DL360 G4 worked for a couple of years without a problem and today after I inserted a second FC HBA which worked in another server until now. From that moment, my dl360 plays dead and both internal and external health LEDs are red. Also inside a big red LED light up ( PS FAN FAIL, PS MULTI FAN FAIL not sure which)

 

- All fans on the PS FAN module are spinning btw. 

- i tried swapping the hotplug PS

- i tried to clean the FAN module

 

but to no avail.

 

Please advide action: new fan module?

2 REPLIES
Nico57
Occasional Advisor

Re: Multiple FANs failed at once?

Does removing the "new" HBA fix the problem?

If so, I'd go for a round of BIOS and firmwares upgrades and give it another try.

(And also check that the card was firmly seated).

 

If it just won't start anymore, I'd sure wouldn't know where to start...

OERNii2
Occasional Visitor

Re: Multiple FANs failed at once?

Removing the HBA solves nothing. I even removed the old one, re-seated the RAMS, the fan module and still nothing.