cancel
Showing results for 
Search instead for 
Did you mean: 

Multiprocessor

 
Ayman Altounji
Valued Contributor

Multiprocessor

We have 2 identical Proliant 2500 servers. We are upgrading to dual processors on both. The first server upgraded with no problem and is running fine. The second is not working so well. The system is not reconizing and initializing the second processor in the bios. I believe I have the latest bios available, E24 / 1999. Any one have any suggestions?
2 REPLIES
Ayman Altounji
Valued Contributor

Re: Multiprocessor

Hi, yes the bios is important. Also did you updated the SCU, system configuration utility. Available at
http://www.compaq.com/support/files/server/us/locate/7_1113.html#172
hope this help. If its nt 4 make sure you upgrade the hall and that the full table map is inable in F10; you call in for more support on this one: 1.800.652.6672. Hope this will help.
Sunil Jerath
Honored Contributor

Re: Multiprocessor

Hello,
Please make sure that the APIC mode is set to full table mapped by going in the advance options of F10(System Partition). Also make sure both CPUs are of same stepping and are identical.

Regards