ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

My Proliant ML 350 G6 won't boot after fan cleaning

tjihkentar
Occasional Collector

My Proliant ML 350 G6 won't boot after fan cleaning

i cleaned the fan and took it back to it's position, but my proliant won't boot, and both health led and Power Supply led turn to amber.

it has 2 PSUs, but there's no difference.

The fans sounds loud for a while and then loudless, but i can't access it from network nor display to it's monitor.

 

can anyone give me the solution? thank in advance.

 

sorry for my bad english

 

Lathif

1 REPLY
Edwin Eppel
Valued Contributor

Re: My Proliant ML 350 G6 won't boot after fan cleaning

Amber system health means that the system is in a "degraded" state and you should examine the diagnostic LEDs on the motherboard for more information. There are 2 power supply LEDs on the motherboard located along the edge near the corner of the processor 1 DIMM slots (the one closest to the DIMM slots is PSU1). Amber power LED means no AC power or a failed power supply. This information can be found in the Server Maintenance and Service Guide.