HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

NC360T Not Visible in Network Configuration Utility

 
SOLVED
Go to solution
Brian Girling
Occasional Visitor

NC360T Not Visible in Network Configuration Utility

We have 3 DL380 G5 servers with NC360T NIC's installed in Slot 2. The NIC's are visible to the OS along with the embedded NC373i but not visible in the Network Configuration Utility (NC373i are visible)

PSP 8.00A has been used

Any ideas - I remember a similar thing with the NC7170 but newer drivers fixed it. I am using the latest drivers in this case
2 REPLIES
KarloChacon
Honored Contributor
Solution

Re: NC360T Not Visible in Network Configuration Utility

hi

I had similar situation and it was fixed by the ways:

1. installing NCU 8.8, if installing NCU 8.8 gives you any miniport error downgrade drivers for NIC too

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121516&prodNameId=3288134&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-f9af4e1c325840beb58658c81d

2. Installing W2003 Service Pack 2, since server did no have that SP2


anything else let us know
regards
Didn't your momma teach you to say thanks!
Brian Girling
Occasional Visitor

Re: NC360T Not Visible in Network Configuration Utility

NCU downgraded sucessully, thank you