ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

NC375i Issues - MS Server 2008 x64

 
Douw G Steyn
Occasional Contributor

NC375i Issues - MS Server 2008 x64

I have a customer that cannot get the NC375i cards to install using the latest PCP's and Firmware from HP. PSP 8.30 and FWCD 8.60.

If the OS is installed without applying any PSP's the installation finished but the NC375i is listed as unknow device. If the PSP is applied the driver installs to 99% failry quickly but then stalls for about 20-30 minutes. After the installation finished the NIC's show up with warning traingle and in Properties (Device cannot Start) Code10.

This has happended on 4 DL370 G6 Servers. Same issue. Tried Server2008 x64 SP2 and Server 2008 R2 - same problem. Any help?
1 REPLY
boks
Occasional Visitor

Re: NC375i Issues - MS Server 2008 x64