ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

NC7771 and NC7781 NICs in ML370G3

Jeroen Koolen
Occasional Visitor

NC7771 and NC7781 NICs in ML370G3

Is recently added a NC7771 NIC to my ML370G3. The System ROM recognises the NIC correctly.

The NIC driver in NT4 (SP6a) only detects the onboard NC7781.

I tried several drivers and configurations without anny result.

Anny sugestions?
2 REPLIES
sputnix
Frequent Advisor

Re: NC7771 and NC7781 NICs in ML370G3

Hi Jeroen,

the NC7771 card is not supported for NT4!
http://h18004.www1.hp.com/products/quickspecs/11449_div/11449_div.html

andreas

Jeroen Koolen
Occasional Visitor

Re: NC7771 and NC7781 NICs in ML370G3

They supplied NT4 Drivers with the NIC. So it is supported. Once in a while Compaq/HP suddenly ends the OS support for a specific product because they don't develop any new versions of the driver. The existing onces stil work. Same story for this NIC!

The on-board NIC (NC7781) uses the same Broadcom 5703 Chipset. Tghis NIC work well under Windows NT 4.0!