NC7781

[Parker23]

I have a Proliant Dl360 G3 with and Nic issue.
Nics NC7781.
The port one it disconnecting for 20 min on then come back on.
Also I already replace the system board.

Thansk,
Parker

[KarloChacon]

hi

OK you replaced system Board but before that did you update the Firmware and Driver for that NIC?

which OS by the way?
are you using NIC teaming?

regards

[Parker23]

Hi Karlo,

No I´m not using the Nic teaming,
Windows server 2003 service pack 2

Regards,

[KarloChacon]

and latest firmware and driver for the NIC?

[Parker23]

Hi,

I already done the firmware and drives update using the PSP 8.00 and FW CD 8.00,
also I am using Windows sever 2003 x32,

Thanks again and regads,

[KarloChacon]

hi

in that case there are newer driver and Firmware you can try

driver 10.78.0.0 (8 Jul 2008)
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316558&swItem=MTX-23565e5af0084d12a752b90348&prodNameId=3288138&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=2


firmware http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316558&swItem=MTX-0a974a22a88f41379bc895116c&prodNameId=3288138&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=3

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316558&swItem=MTX-0a974a22a88f41379bc895116c&prodNameId=3288138&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=3

regards