1748237 Members
3608 Online
108759 Solutions
New Discussion

NCU link diagnostics

 
yaro137
Advisor

NCU link diagnostics

What would it be behind link test implemented within NCU. How is this tested in L1? I was running some tests and ended up with NIC port failing some of link tests and in the end the connection wend down all together.  

1 REPLY 1
SanjeevGoyal
HPE Pro

Re: NCU link diagnostics

Hello,

Please tell us, what is teaming done in your server as well as the server model and what is the NIC card detail.

Below is the teaming information.

Network Fault Tolerance
Transmit Load Balancing with Fault Tolerance
Switch assisted Load Balancing with Fault Tolerance
Switch assisted Dual Channel Load Balancing

Please follow the below customer advisory for your reference.

SUPPORT COMMUNICATION - CUSTOMER NOTICE

https://support.hpe.com/hpesc/public/docDisplay?docId=c04539182

Advisory: (Revision) HPE Network Adapters - A Team of Network Adapters Created Using The HPE Network Configuration Utility (NCU) May Drop PINGs And Other Data

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c05376625

HP Network Configuration Utility - General Recommendations for SLB / LACP Based Teaming

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04249877

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

 


I am a HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo