NIC Not Detected: Server: DL385G7 NIC: HP NC360T

[Doug Flint]

Installed new NIC in PCI Slot 5. 

(PCI Slot 6 has a fiber card installed. (AE312A))

New NIC is not detected in BIOS.

[Jimmy Vance]

can you give more detail on what you expect to see in RBSU? I think the only place it will be shown is under the  "PCI IRQ Settings" screen. During POST the NIC should display some ROM information

[Doug Flint]

Screenshot attached. Nothing listed for PCI Slot 5.

[Doug Flint]

I don't see any reference to the new NIC on the Post Screens.

[Jimmy Vance]

Have you tried a different slot? could be as simple as being a bad NIC

[scharchouf]

when I check Picture for BIOS, I see that on PCI Slot 6 you have AE312A - HP StorageWorks FC1242SR 4Gb PCIe DC Host Bus Adapter

and you said that normaly this card is installed on PCI Slot 4!!!

can you give me please the type of NIC card?

[Doug Flint]

We have tried 2 different NICs with the same result.
Slot 5 is the only unused slot.

[Doug Flint]

You are correct the fiber card is in Slot 6. My mistake.

The NIC is listed in the subject line. HP NC360T.

[Torsten.]

The server can have different riser cards

see

http://h18004.www1.hp.com/products/quickspecs/productbulletin.html#spectype=worldwide&type=html&docid=13594

section Expansion Slots.

What riser do you have?

You could try to put the known working FC card into this slot just to ensure the slot is working.

[scharchouf]

How Many Riser are installed in this server?

can you give me the part number of Riser?

you can tell me the server when it was purchased? this is essential information.