NMI Errors on BL40p

[Windows Washer]

I've ran the RDP Package on a BL40p (6 Go Ram, 4x2.8GhZ, connected to a SAN EV500) and the W2K installation ran well.

But at the end when i reboot i get ...
"NMI Parity check / Memory Parity Error"

I've tried to run it without all this memory but in vain...

Does anyone able to help me ?

[Sunil Jerath]

Hello,
Have you tried running the server without being connected to SAN?? If not please give it a try and also bring the RAM to minimum configuration.

Regards,

[Windows Washer]

That's what i am going to do...

The issue is that the OS is installed on the San...But yes i'm gonna try this..

[Windows Washer]

Found...

In fact we bought BL40p with 2 proc. We had the good idea to add 2 more proc....And The systems hangs up with 4 procs. So i just think that it is an hardwaure switch to ....

So if you have the info don't hesistate cause HP in France does know about it...They don't even know Blade Serevrs...

[chris_505]

Are you using US Robotics cards?

[Windows Washer]

No i don't use US Robotics Cards...

In fact i solve the issue by using the RDP Update and follow step by step the HP document. And now all our blade servers are running well.

Thanks a lot everybody.

If I can help you, don't hesitate,