Showing results for 
Search instead for 
Did you mean: 


budi wahana
Occasional Contributor


Hi John Ruffo or Everybody:

I've got problem when installing SCO OpenServer 5.0.5/5.0.6 on ML150 with smart array 642. I follow the guidance on EFS 5.64. Boot string I used is defbootstr link=ciss hd=Sdsk Sdsk=ciss(0,0,0,0) Srom=wd(0,0,0).

At the time of booting there was a message/warning Test Open Failed "hd=Sdsk" No root disk controller. Continuing the installation until type in license and serial number was succeed. After reading the CD there was an error: No root disk has been detected Verify that your h/w config has a disk attached and configured as the primary disk. Actually all is properly installed (3 hd on primary). Just for your info, in the hard disk there is still Linux RedHat 8 installed.

Thak you in advance for any suggestion and solution.