NO display

[cpradip1069]

hi,
i have HP prolaint DL380 G4 model server,the problem in that server is no display.I checked power supply its working.so i diassembly all part and asssemble it, but no display is coming.i also checked LED lights, its not showing amber.please tell me problem and their solution

Regard
pradeep

[Peter Billington]

I have the exact same problem on the same server today. The server was powered off for about 8hours and now will not boot and there is no display at all, I can not see any error lights
Did you manage to resolve this?

[KarloChacon]

have you reset the System maintenance switch (number 6) to clear NVRAM or through RBSU, you clean the NVRAM too (but you dont have display)

look for the

Maintenance and Service Guide for your server
it will indicate some info

regards

[cpradip1069]

hi
i clean my NVRAM but steel same problem is coming.

Regard,
pradip

[KarloChacon]

the server is turning on?

have you tried minimal configuration?

remove any third party component...

just to be sure "Re-connect the power button/LED cable to the power switch and drive backplane"

regards

[Prabhulj]

Hi Pradip,

Refer to a similar issue reported on a different thread.

https://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1123553

Further more, Incase if you havent tried this. Could you try to re-seat the PCI Riser Cage on the server to check if it helps?

Refer to The Maintenance and Service Guide.
Page: 30 and 31

Link:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentTyp
e=SupportManual〈=en&cc=us&docIndexId=179911&taskId=101&prodTypeId=15
351&prodSeriesId=397634#1

Hope this helps.

Regards,
Prabhu