HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

NT 4.0 Server on ML350 G4 doesn't insatll

 
lbodnar
Occasional Visitor

NT 4.0 Server on ML350 G4 doesn't insatll

We need to install Windows NT 4.0 Server on a newly purchased ML350 G4 Xeon 3.0GHz

After booting from NT installation CDROM or Floppies (2nd floppy), install program suddenly reboots the server and there is no way to prevent that.

Tried:
Install W2000 server - OK
Disabling HT and other advanced options in BIOS - does not help
Install NT 4.0 client - reboots exactly the same way

Please give me some ideas or, better, the solution!
2 REPLIES
Tom Mucha_1
Trusted Contributor

Re: NT 4.0 Server on ML350 G4 doesn't insatll

From the ML350G4 Questions and Answers page: http://h18004.www1.hp.com/products/servers/proliantml350/questionsanswers-g4.html#a3

# The ML350 G4 does not support Windows NT 4.0

There might be ways to find nt4 drivers and get it booted. What kind of array controller are you using?
Oleg Koroz
Honored Contributor

Re: NT 4.0 Server on ML350 G4 doesn't insatll

On board 6i controller
G4 support only 6th generation controllers
NT 4 is not supported by chipset in G4 servers