ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

NT 4.0 repair process

Mazen Haffar
Occasional Visitor

NT 4.0 repair process

I want to use my ERD on a compaq ML570. When installing scsi drivers manually in the first phase of repair...
the system loads only the following drivers:
1- Compaq 32-Bit scsi-2 controller.
2- Drive array controller.
3- Fibre channel host controller.
4- Fibre Channel filter driver.

I then also forced it to take comap smart array 530x controller.
Setup halts indicating that it can find hard drives.....?

Any sugestions
Tom Mucha_1
Trusted Contributor

Re: NT 4.0 repair process

Try downloading this

It's the 5300 support diskette which had the drivers on it. I'm wondering if the driver your giving it is the wrong one.