ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

NT Terminal Server

 
Ayman Altounji
Valued Contributor

NT Terminal Server

When loading up Windows NT terminal server through the smartstep software using a custom install. When the installation process reaches the end of the install installing graphic drivers etc the server displays a blue screen of death with an ntoskernal error. Please can you email me suggestions to get around this problem. I noticed that NT terminal server is supported by Compaq on the OS support matrix. But the OS will not install.
1 REPLY
Ayman Altounji
Valued Contributor

Re: NT Terminal Server

I had this same issue. What I did, was left everything defaulted. I also did not load the network drivers for the machine. Make sure that you put it on Do not put on a network at this time. Once that is done, bring the server up and load service pack 5 or 6 on it. Then go back and load the network and video drivers. Good luck