NTBACKUP Command with Internal DLT

[Ayman Altounji]

What is the correct syntax for the NTBACKUP command on ML570 Server with Internal Quantum DLT7000 DDT IV drive with Windows
2000 SP2? There are no media pools, just tape in the drive. Example

":\> ntbackup backup e: /t DLT /m normal /hc:on"

Command brings up backup window, but exits
Thanks in advance.

[Ayman Altounji]

No doubt you've figured this one out, but here's a line that works fine with my internal Compaq 20/40 DDS tape drive on my ML570:

C:\WINNT\system32\NTBACKUP.EXE backup "@C:\batch\DayBack.bks" /n "Data Backup" /d "Data Backup" /v:yes /r:no /rs:no /hc:on /m normal /j "databack" /l:s /p "4mm DDS" /um

Chris.