NW4.11

[Ayman Altounji]

Can NW4.11 run on a ProLiant ML 350 server?

[Ayman Altounji]

For support check out this link
Only 4.2 and up is supported on that model.

ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf

[Ayman Altounji]

It is not support but I install it. You must "make" a patched installation with sp9

[Ayman Altounji]

Hello,

First this version of NetWare is not a Supported Operating System for this server; please check out the Compaq Server Support matrix [ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf]

Compaq does provide a MANUAL install path for this operating system under the Smart Start install path.

If you browse the Smart Start CD you will see a directory called CPQHLP, under this directory are all the ?HELP? files for the Smart Start CD along with other various tid bits of Compaq specific information,

Under this directory if you open the help file labelled NWPRMENG, you will see the Manual Novell 4.11 instructions. If you follow this ?STEP BY STEP? guide you should not run into any specific issues.

There are specific drivers that need to be loaded depending of the module and CPU speed of the server, you should contact Compaq Technical Support for additional information regarding these drivers and other helpful time saving steps.

Jason