NX2 2021.04 Gen10 & 2021.05 Gen9 firmware

[UserName1]

Morning,

Is anyone else having issues applying the 2021.04 SPP Gen10 to sevrers that have the HPE FlxFbrc 10Gb 4p 536FLR-T Adptr installed?

We haven't been unable to apply it to a single server in our estate.

[Anu_K]

Hello,

I tried to check for any advisories related to the same issue that you are facing, unfortunately I could not find the exact same issue however found the below advisory which may give you some idea on this, https://support.hpe.com/hpesc/public/docDisplay?docId=a00066423en_us&docLocale=en_US

Additionally to test with, you could try the SPP update in interactive manner and unselect this adapter for the update and update it seperately (firmware packages are available in the above link, from rivision history on firmware download page you can download the required version).

Hope it helps!

Note: "While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company."

[UserName1]

Good Morning,

I have also tried it in interactive mode and select only that firmware and it still fails.  If I untick that one and leave all the other selected that need to be applied as part of the SPP they install as expected.

I will give the above link a go on one, but that isnt a real solution, we need to the SPP to work as manual install on every host is time consuming and prone to error.

Thanks.