Need a part number for the power switch/LED assy on a DL180-G6

[Sean Corbett]

I'm having a problem powering on the server and have replaced everything and it still won't power up. So as a last hope I would like to replace the switch. However, there is no part listing for it in the manual or anywhere that I could find.

Help please!!!

Thanks,
Sean

[Sean Corbett]

I have also, already pulled the switch and there is no part number on it.

[katie1]

how many powere supplies any leds lit
newver seen a switch fail to test you can just join short the two wires going in to it

never changed a switch in a server they are virtually bullet proof, literally
what are the symptoms,
what colour are leds on psu etc and leds on front any changes made if so what,
do fans spin at all do leds light which one s,,

what have you tried so far


This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)


,

[Sean Corbett]

I'm actually asking for a co-worker, so I don't know the exact specifics and order in which he did these things but so far.....

He's changed out the system board and power supplies (both p/s have green LEDs).

Power button is orange (standby) and when you press it the server doesn't power up. There are no other indications of any other problems as far as he could tell.

[marcus1234]

remove all pci card and try start up

how many psu units are there ..
=======================================
MY signature
This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)

[Sean Corbett]

I guess I should have started the message by stating that I am an HP-CE as is my co-worker. So all possible troubleshooting steps have been taken. Things such as removing all PCI cards and taking the server down to bare minimum have been done.

That's why he's looking at the power switch as the issue. Its a shot in the dark but the only thing left that we can think of. Problem is we can't find a part number for it. Its not in the manual, its not on HP Partsurfer, and no one we've talked to can find it either.

[marcus1234]

just short it to test,

[marcus1234]

i would be looking at power backplane,,
let me know how it goes good luck

[Sean Corbett]

Power backplane, don't think he tried that. Thanks!! I will report back if either thing worked.

[marcus1234]

hmm sean did it work



This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)