ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Need help to connect the BBWC to my DL380 G3

 
tived
Occasional Contributor

Need help to connect the BBWC to my DL380 G3

hi guys,

I am new to all this and would really appreciate your help here.

I have the above server and have purchased the BBWC to connect to it. However, i am a little unsure where I am suppose to plug this into on the mainboard. if someone with a good diagram would be so kind as to show me how, thanks

Henrik
2 REPLIES
Rajashekar Chintakunta
Honored Contributor

Re: Need help to connect the BBWC to my DL380 G3

Hi Tived,

Go through the HP ProLiant DL380 Generation 3 Server Maintenance and Service Guide:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00065010/c00065010.pdf

Check the section Removal and Replacement Procedures. Battery-Backed Write Cache Enabler Bracket, Battery-Backed Write Cache Enabler.

Regards,
Raj.
tived
Occasional Contributor

Re: Need help to connect the BBWC to my DL380 G3

Thanks Raj,

got it, there was a cable connected already and when I first pulled it, it seemed to be connected somewhere at the front, but...it wasn't atleast not anymore ;-)

thanks

Henrik