ProLiant Servers (ML,DL,SL)
1745798 Members
3257 Online
108722 Solutions
New Discussion юеВ

Need help to create RAID in UEFI Shell

 
SOLVED
Go to solution
Simpat
Frequent Advisor

Need help to create RAID in UEFI Shell

In Gen9, Is there a way to create RAID (hpssacli) in UEFI Shell before proceed to PXE boot (KickStart)?
|------------- ( ^__^ )--------------|
I'm Happy when You're Happy
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: Need help to create RAID in UEFI Shell

Here:

HPSSA.jpg


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Simpat
Frequent Advisor

Re: Need help to create RAID in UEFI Shell

Hi @Torsten.,  What if I use P440 SmartArray?  Do I still need to lauch SSA tool for create a RAID?

|------------- ( ^__^ )--------------|
I'm Happy when You're Happy
Torsten.
Acclaimed Contributor

Re: Need help to create RAID in UEFI Shell

There is no native UEFI tool for configuration.

You can run SSA as GUI or CLI, based on Intelligent Provisioning that is built-in.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!