HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Need some help to fix ML370 G4 RAID5 drives running SCO 5.0.7

 
KentChiu
Occasional Contributor

Need some help to fix ML370 G4 RAID5 drives running SCO 5.0.7

Hello,

 

I was wondering if someone could give me some pointers to fix our RAID5 drives?

 

We have an old ML370 G4 set up with RAID5 running SCO 5.0.7. We want to replace the drives (7 years old). The drives were set up using HP 6402 SCSI controller with RAID 5 (3 drives plus a spare drive). is there a utitlity/command that I can run on SCO 5.0.7 to manage the RAID5 drives?

 

What is the best way to replace all the drives. The drives are supposed to be hot swappable. We are afraid that when the system got turned off, it may not boot due to the drive failure.

 

Thank you so much for your help.

 

Thanks,

Kent